🔨 Asphalt Installation Quick Facts
Asphalt shingles dominate 75% of residential roofing in America for good reason: affordability, variety, and proven durability. Understanding the professional installation process helps homeowners roof installation.
Step 2: Main Shingles installation detail
1. Pre-Installation Assessment
Professional roofers begin with thorough site inspection and planning:
2. Tear-Off Process
Removing old roofing is the first major installation step:
3. Underlayment Installation
Underlayment protects your home from water infiltration:
4. Flashing Installation
Proper flashing prevents 90% of roof leaks around penetrations:
5. Shingle Installation Process
The actual shingle application follows strict industry standards:
6. Proper Nailing Technique
Install starter shingles along eaves with nails 3-4 inches from edge. Creates proper water shedding angle.
7. Cost Breakdown
Install rows working toward ridge. Each shingle 4 nails minimum (6 recommended). Offset courses like brick pattern.
8. Timeline & Project Duration
Cut shingles carefully at valleys. Optional: install valley flashing first for extra protection (recommended in Savannah).
9. Post-Installation Inspection
Install ridge cap shingles on peaks. Nail carefully - exposed nails cause leaks if penetrated by wind.
Professional Asphalt Roof Installation in Savannah
Nailing is critical - improper nailing causes 50% of premature shingle failures:
Tear-Off Steps
Understanding what goes into asphalt roof installation costs:
Synthetic Underlayment (Modern)
Typical asphalt roof installation timeline for residential homes:
Felt Underlayment (Traditional)
Professional roofers perform thorough final inspection before completion:
Critical Flashing Areas
Ready for a new asphalt roof? Our certified crew follows all manufacturer and industry standards for proper installation with full warranty coverage.